Artificial Grass Measuring Guide: How To Measure A Space & Calculate The Square Footage

Homeowners in Plano, TX may be wondering how much artificial grass costs to install.

The cost of installing artificial grass depends on a number of factors, the most important of which is the size of the installation in question.

The larger the area, the higher the installation cost.

If you’re considering an artificial grass installation for your residential or commercial property, you’ll need to calculate the square footage of the space.

With this information, you can more accurately determine the cost of artificial grass for your residential or commercial property.

In this turf measuring guide, we’ll show you how to measure an area and calculate the square footage.

How To Measure For Artificial Grass

How To Measure A Space & Calculate Square Footage For Artificial Turf

If you’re a Plano homeowner considering artificial grass, you may be wondering how to measure the space where you want to install it.

Don’t worry, we’re here to help!

In this article, we’ll walk you through how to measure an area and calculate the square footage for artificial grass.

Not every turf installation is a rectangle or perfect square, so we’ll demonstrate the measuring techniques for differently shaped areas.

The shapes we’ll be using as examples are as follows:

  • Square / Rectangle
  • Round
  • Triangle
  • L-shaped
Why Measure For Artificial Grass

Why Do I Need To Measure & Calculate The Square Footage Of A Space For Artificial Grass? 

Installing artificial grass is a great way to improve your home or business’s appearance while also reducing the amount of maintenance needed.

However, as mentioned above, one of the most common questions people have about artificial grass is how much it will cost.

This question can’t be answered accurately without first knowing how much artificial grass will be needed.

The best way to determine how much artificial grass you’ll need is to measure the space you want to cover and calculate the square footage.

Artificial turf comes in rolls that are typically 15 feet wide by 100 feet long, but sizes may vary depending on the manufacturer.

It’s also important to remember that artificial grass is directional, meaning the turf fibers lay in one direction, like fur.

This means that your space will require enough turf for the pieces to be cut with the fibers of both pieces facing the same direction.

In the United States, artificial grass is typically sold by the square foot, so it’s important to have an accurate estimate of how much coverage you need.

Measuring the space and calculating the square footage is the best way to ensure you get an accurate estimate for your artificial grass project.

Tools Needed for Measuring For Turf

What Do I Need to Measure & Calculate Square Footage?  

Measuring a space to calculate the square footage is pretty straightforward and you’ll need a few tools before getting started.

Gather the following items before you measure your lawn/space/area.

  • Tape measure
  • Pen or pencil
  • Graph Paper
  • Calculator
Step-By-Step Turf Measuring Guide

How To Measure An Area & Calculate The Square Footage Step-By-Step

Now that you have your materials, you’re ready to measure how much square footage of synthetic grass your yard or space will require.

If you’re feeling a little intimidated by the prospect of calculating square footage, don’t worry.

Your mathematical skills may be a little rusty, but that’s not a problem.

We’re here to guide you through each step of the process.

Step 1. Measure Widest & Longest Points

STEP #1: Measure Widest & Longest Points 

Measure your lawn like a rectangle or square to make it simpler.

If you have rounded edges, curves, sharp angles, or an odd shape, extend the measurements so it will fit in a rectangle or square.

Keep in mind that artificial turf usually comes in large rolls that are essentially rectangles.

Any curves, sharp angles, or odd shapes will need to be cut from a rectangular piece of turf.

If you’re still having trouble measuring, we’ve put together some custom graphics to provide examples of how to measure differently shaped lawns for artificial grass.

This way, you can get a better understanding of how to measure your space correctly.

Rectangle Lawn Measurements

Square & Rectangular Lawns  

If you have a square or rectangular lawn, you’re in luck, because those are the easiest spaces to measure for turf.

Using your tape measure, measure the length and width of your lawn, as represented in the graphic above.

Because artificial grass rolls primarily come in 15′ widths, divide the width of your space into segments measuring 15-feet.

If the width of your lawn can’t be divided evenly by 15, you’ll have a strip of turf that ends up mostly as waste.

Round Lawn Measurements

Round Lawns  

Measuring round spaces to calculate the square footage is actually pretty simple.

Begin by measuring the diameter of your round lawn and draw it to scale of a piece of graph paper.

Next, divide the circle into 15-foot-wide stripes and measure each strip at its longest point.

L-Shaped Lawn Measurements

L-Shaped Lawns  

Measuring an L-shaped lawn is a bit more difficult than the examples above.

You basically want to divide the area into two separate rectangular sections.

Measure each rectangular section and plot them on graph paper.

Next, determine the length and width of each independent rectangular section.

You’ll add them together in the next step.

Triangle Lawn Measurements

Triangular Shaped Lawns  

Triangular-shaped lawns are the trickiest to measure for artificial grass. It’s best to do this with graph paper and a pencil.

We’ll provide an example below. 

For smaller triangular-sized spaces less than 15 feet at its widest, you can just treat them as half of a square and measure the two sides that form the right angle.

For larger triangular-shaped lawns, continue with the following steps.

  1. Measure all three sides of your triangular space and plot it out on graph paper.
  2. Divide the leg of the triangle on the x-axis into 15-foot sections.
  3. Treat each 15-foot section like a rectangle and measure how long the strip of turf will need to be by measuring where the longest leg (hypotenuse) of the triangle hits the y-axis. 

If your x-axis leg doesn’t divide evenly into 15-foot lengths, account for an extra strip of turf to cover the remainder.

Also, don’t forget that turf is directional, so you can’t use scrap material to cover a small space. 

With these steps, you should have a pretty good idea of how to measure your triangular lawn for artificial grass!

Step 2. Multiply Width x Length

STEP #2: Multiply the Width x Length 

Determining the square footage of rectangular or square-shaped spaces is as simple as multiplying the length and width.

Below are a few examples of how to calculate the square footage for square and rectangular spaces:

  • For a space with a width of 25 feet and a length of 25 feet, simply multiply 25 x 25, which equals 625 sq. ft. (25 x 25 = 625)
  • For a space with a width of 31 feet and a length of 23 feet, simply multiply 31 x 23, which equals 713 sq. ft. (31 x 23 = 713)
  • For a space with a width of 15 feet and a length of 84 feet, simply multiply 15 x 84, which equals 1,260 sq. ft. (15 x 84 = 1,260)
  • For a space with a width of 59 feet and a length of 43 feet, simply multiply 59 x 43, which equals 2,537 sq. ft. (59 x 43 = 2,537)
  • For a space with a width of 55 feet and a length of 65 feet, simply multiply 55 x 65, which equals 3,575 sq. ft. (55 x 65 = 3,575)

That’s enough examples for square and rectangular spaces, so let’s take a look at how to determine the square footage of round, L-shaped, and triangular spaces.

With these spaces, it helps to think of it as a series of rectangles.

You’re going to calculate the square feet of the rectangles and then add them up to determine the total square footage of artificial grass required for your installation.

Using the triangle-shaped lawn from above as an example, let’s determine the square footage of each strip of turf required.

  • 15 feet x 45 feet = 675 square feet
  • 15 feet x 30 feet = 450 square feet
  • 15 feet x 15 feet = 225 square feet

By adding the square feet of each strip of turf, you get a total of 1,350 square feet (675 + 450 + 225 = 1,370).

The same method can be used to calculate the square footage of circular and L-shaped spaces.

Measure the area of each strip of turf needed, then add them to get the total square footage of the space.

Step 3. Check Estimated Cost

STEP #3: Get An Estimate To Install Artificial Grass in Your Space 

By measuring and calculating the square footage of the space where you’re considering installing artificial grass, you’ll be able to receive a more accurate estimate of the installation cost.

While an estimate is just that, an ‘Estimate,’ knowing how much artificial grass will be required to properly cover the area makes it easier for us to provide a more realistic estimate without having seen the area ourselves.

It’s worth pointing out that even knowing the exact square footage of a space, there are numerous other variables that influence the total installation cost of artificial grass.

Some of those variables include:

  • Project Size [Square Footage]
  • Pre-Installation Site Prep [i.e. Removing Sod, Bushes, Shrubs, Trees, Rocks, Capping Sprinkler Heads, Moving Irrigation Systems, Etc.]
  • Turf Product or Type of Turf
  • Infill Material [Silica Sand, T°Cool™, Envirofill]
  • Installation Extras: Bender Board, Drainage Membrane, Foam Padding, Etc.

The above are the most significant factors in determining the cost of installing artificial grass at your residential or commercial property in Plano, TX.

There are a number of smaller factors that play a role as well.

Wrapping Up Our Turf Measuring Guide

Wrapping Up Our Artificial Grass Measuring & Square Footage Calculating Guide

Now that you understand the basics of turf measuring, it’s time to get started on your project!

With years of experience in the artificial grass industry, we are here to provide you with all the information about artificial grass you need to make an informed decision for your property.

There is a lot to learn about the different features and components of artificial grass, so we recommend exploring our website.

The first step on your journey to a perfect, low-maintenance artificial grass installation is to educate yourself about the features and options available. 

We have content to help you learn about: 

We have artificial turf products for every situation, free quotes, and excellent customer support.

Let’s get your journey started with a free, no-obligation consultation with one of our professional turf consultants to help you put together an installation plan.

Our team at Plano Turf Installers is here to help you every step of the way; from exploring the different options available to providing expert installation advice, we want to ensure that your artificial grass installation exceeds your expectations.

Contact us today for a free quote or you can give us a call at 469-817-7566!

Request A FREE Quote Today!

Fill out the form below to request a free quote. We aren't going to spam you with emails or call you a thousand times. After you fill out the form, a turf design and installation specialist will be in touch within 48 hours. No obligation, just fill out this form to get the process started.
Contact Form [SMALL]